AIC Porous Conducting Carbon Paper – JSR Series
JSR is carbon composites paper which is used for PAFC & PEFC based on PAN based fibers. They offer high corrosion resistance and has excellent stability to perform under extreme conditions. Its high mechanical strength, conductivity and gas permeability are suitable for use as a Gas Diffusion Layer (GDL) in fuel cell applications.
Standard Sizes
Thickness
- 100 X 100 MM
- 200 X 200 MM
- 300 X 300 MM
- 400 X 400 MM
- 500 X 500 MM
- JSR 90 – 90 to 110 μ
- JSR 180 – 170 to 190 μ
- JSR 280 – 260 to 290 μ
- JSR 360 – 360 to 400 μ
- JSR 1000 – 1 mm
- JSR 1500 – 1.5 mm
- JSR 2000 – 2 mm
JSR PTFE TREATED CARBON PAPERS:
JSR carbon papers are offered with standard PTFE treatments for water repellency
- CUSTOMISED PTFE LOADING IS AVAILABLE ON REQUEST
- JSR CAN BE CUSTOMISED AS PER THE CUSTOMERS REQUIREMENT.
APPLICATIONS APART FROM FUEL CELL
Due to the excellent conductivity and high surface area, the GDL’s can be used in various similar applications as below;
- METAL AIR BATTERIES
- MICROBIAL FUEL CELLS
- REDOX FLOW BATTERIES
- CORROSIVE FILTERATION ETC
Analysis of Porous Conducting Carbon Paper (Porosity / Pore size analyses):
- Through resistivity = 0.07cm
- In-Plane resistivity = 0.005-0.006cm
- XRD Characterization: d002 = 3.387A
- Pore size = 32μm (Range 10-60μm)
- Porosity = 65-80%
- Contact angle = 135 -137
Gas Characteristics
- High Strength
- Excellent Gas Permeability
- Low Electrical Resistivity
- Good Handling
- Minimal Low Electro-chemical Corrosion
Properties Of AIC Porous Conducting Carbon Paper
Data Sheet for AICPL Porous Conducting Carbon Paper